# Edit this configuration file to define what should be installed on # your system. Help is available in the configuration.nix(5) man page, on # https://search.nixos.org/options and in the NixOS manual (`nixos-help`). { config, lib, pkgs, ... }: { imports = [ # Include the results of the hardware scan. ./hardware-configuration.nix ]; nix.settings.experimental-features = [ "nix-command" "flakes" ]; nixpkgs.config.allowUnfree = true; # Use the systemd-boot EFI boot loader. boot.loader.systemd-boot.enable = true; boot.loader.efi.canTouchEfiVariables = true; boot.supportedFilesystems = [ "zfs" ]; boot.zfs.extraPools = [ "alex1" ]; boot.zfs.forceImportRoot = false; networking.hostName = "atauno"; # Define your hostname. networking.hostId = "ae3574b1"; # for zfs importing pools during boot # Set your time zone. time.timeZone = "America/New_York"; # Define a user account. Don't forget to set a password with ‘passwd’. users.users = { alex = { isNormalUser = true; extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user. packages = with pkgs; [ git ]; }; # Used for samba matson = { isNormalUser = true; extraGroups = [ ]; }; }; # List packages installed in system profile. To search, run: # $ nix search wget environment.systemPackages = with pkgs; [ magic-wormhole ncdu nfs-utils vim wireguard-tools ]; # List services that you want to enable: services.k3s.enable = true; services.k3s.role = "server"; services.k3s.extraFlags = toString [ # "--kubelet-arg=v=4" # Optionally add additional args to k3s "--tls-san=atauno.com" ]; services.samba-wsdd = { # make shares visible for Windows clients enable = true; openFirewall = true; }; services.samba = { enable = true; securityType = "user"; extraConfig = '' workgroup = WORKGROUP server string = atauno netbios name = atauno security = user #use sendfile = yes #max protocol = smb2 # note: localhost is the ipv6 localhost ::1 hosts allow = 192.168.1. 10.100.0. 127.0.0.1 localhost hosts deny = 0.0.0.0/0 guest account = nobody map to guest = bad user ''; shares = { family = { path = "/zfs/family"; browseable = "yes"; "read only" = "no"; "guest ok" = "no"; "force create mode" = 774; "force user" = "matson"; "force group" = "users"; }; music = { path = "/zfs/music"; browseable = "yes"; "read only" = "no"; "guest ok" = "no"; "force create mode" = 774; "force user" = "matson"; "force group" = "users"; }; }; }; # Enable the OpenSSH daemon. services.openssh.enable = true; # Open ports in the firewall. # networking.firewall.allowedTCPPorts = [ ... ]; # networking.firewall.allowedUDPPorts = [ ... ]; # Or disable the firewall altogether. networking.firewall.enable = false; # enable NAT networking.nat.enable = true; networking.nat.externalInterface = "enp42s0"; networking.nat.internalInterfaces = [ "wg0" ]; networking.firewall = { allowedUDPPorts = [ 51820 ]; }; networking.wireguard.interfaces = { # "wg0" is the network interface name. You can name the interface arbitrarily. wg0 = { # Determines the IP address and subnet of the server's end of the tunnel interface. ips = [ "10.100.0.1/24" ]; # The port that WireGuard listens to. Must be accessible by the client. listenPort = 51820; # This allows the wireguard server to route your traffic to the internet and hence be like a VPN # For this to work you have to set the dnsserver IP of your router (or dnsserver of choice) in your clients postSetup = '' ${pkgs.iptables}/bin/iptables -t nat -A POSTROUTING -s 10.100.0.0/24 -o eth0 -j MASQUERADE ''; # This undoes the above command postShutdown = '' ${pkgs.iptables}/bin/iptables -t nat -D POSTROUTING -s 10.100.0.0/24 -o eth0 -j MASQUERADE ''; # Path to the private key file. # # Note: The private key can also be included inline via the privateKey option, # but this makes the private key world-readable; thus, using privateKeyFile is # recommended. privateKeyFile = "/home/alex/wireguard-keys/private"; peers = [ # List of allowed peers. { # Feel free to give a meaning full name # Public key of the peer (not a file path). # nixos76 laptop publicKey = "KVViY+Bgu7PoBeS+rthcyQVQB03IdolxDzc5ZwsdNnM="; # List of IPs assigned to this peer within the tunnel subnet. Used to configure routing. allowedIPs = [ "10.100.0.2/32" ]; } { # josh's laptop publicKey = "MdHzEaX6BkgOLZcIAFdgxYt0iDdh2vL25jMjuTFVDVM="; allowedIPs = [ "10.100.0.3/32" ]; } { # alex android op9t publicKey = "zVEFb82M79UoBpAkgbiN0MWQqcjmChTFDLQOSRY/VRk="; allowedIPs = [ "10.100.0.4/32" ]; } { # alex thelio desktop publicKey = "UIAOvMhHp6W77pAo+mLb3XluzOrk095SgCvaE0ErAEY="; allowedIPs = [ "10.100.0.10/32" ]; } ]; }; }; # Copy the NixOS configuration file and link it from the resulting system # (/run/current-system/configuration.nix). This is useful in case you # accidentally delete configuration.nix. # system.copySystemConfiguration = true; # This option defines the first version of NixOS you have installed on this particular machine, # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions. # # Most users should NEVER change this value after the initial install, for any reason, # even if you've upgraded your system to a new NixOS release. # # This value does NOT affect the Nixpkgs version your packages and OS are pulled from, # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how # to actually do that. # # This value being lower than the current NixOS release does NOT mean your system is # out of date, out of support, or vulnerable. # # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration, # and migrated your data accordingly. # # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion . system.stateVersion = "24.05"; # Did you read the comment? }