# This file merged the original configuration.nix and hardware-configuration.nix files, refactoring common system config out

{ config, lib, pkgs, modulesPath, ... }:

{
  imports =
    [
      (modulesPath + "/installer/scan/not-detected.nix")
      ../../modules/system76-pc.nix
    ];

  networking.hostName = "nixos76"; # Define your hostname.

  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usb_storage" "usbhid" "sd_mod" "rtsx_pci_sdmmc" ];
  boot.initrd.kernelModules = [ ];
  boot.kernelModules = [ "kvm-intel" ];
  boot.extraModulePackages = [ ];

  environment.etc.crypttab = {
    enable = true;
    text = ''
      # /etc/crypttab: mappings for encrypted partitions.
      #
      # Each mapped device will be created in /dev/mapper, so your /etc/fstab
      # should use the /dev/mapper/<name> paths for encrypted devices.
      #
      # See crypttab(5) for the supported syntax.
      #
      # NOTE: Do not list your root (/) partition here, it must be set up
      #       beforehand by the initramfs (/etc/mkinitcpio.conf). The same applies
      #       to encrypted swap, which should be set up with mkinitcpio-openswap
      #       for resume support.
      #
      # <name>               <device>                         <password> <options>
      externaldrive UUID=b9e3979c-9362-4242-a835-6dd702dfb0ee /etc/externalHD_keyfile.bin luks
    '';
  };

  fileSystems =
    let
      externalPrefix = "/media/external";
      homePrefix = "/home/alex";
    in
    {
      "/" = {
        device = "/dev/disk/by-uuid/6d62467a-ccc1-44ed-a1cc-f473b3962c64";
        fsType = "ext4";
      };

      "/boot" = {
        device = "/dev/disk/by-uuid/2330-1A62";
        fsType = "vfat";
      };

      "/media/external" = {
        device = "/dev/mapper/externaldrive";
        options = [ "x-gvfs-show" ];
      };

      "${homePrefix}/Documents" = {
        device = "${externalPrefix}/Documents";
        options = [ "bind" "x-gvfs-hide" ];
      };

      "${homePrefix}/Games" = {
        device = "${externalPrefix}/Games";
        options = [ "bind" "x-gvfs-hide" ];
      };

      "${homePrefix}/Git" = {
        device = "${externalPrefix}/Git";
        options = [ "bind" "x-gvfs-hide" ];
      };

      "${homePrefix}/Lutris" = {
        device = "${externalPrefix}/Lutris";
        options = [ "bind" "x-gvfs-hide" ];
      };

      "${homePrefix}/Music" = {
        device = "${externalPrefix}/Music";
        options = [ "bind" "x-gvfs-hide" ];
      };

      "${homePrefix}/Pictures" = {
        device = "${externalPrefix}/Pictures";
        options = [ "bind" "x-gvfs-hide" ];
      };

      "${homePrefix}/Videos" = {
        device = "${externalPrefix}/Videos";
        options = [ "bind" "x-gvfs-hide" ];
      };
    };

  swapDevices =
    [{ device = "/dev/disk/by-uuid/fda4f9fe-383f-477c-b2a2-c07f7efcc161"; }];


  # What was this for? maybe wireguard?
  networking.firewall = {
    allowedUDPPorts = [ 51820 22000 ]; # Clients and peers can use the same port, see listenport
    allowedTCPPorts = [ 22000 48412 62109 ];
    allowedTCPPortRanges = [
      { from = 1714; to = 1764; } # KDE Connect
    ];
    allowedUDPPortRanges = [
      { from = 1714; to = 1764; } # KDE Connect
    ];
  };

  # Enable WireGuard
  networking.wireguard.interfaces = {
    # "wg0" is the network interface name. You can name the interface arbitrarily.
    wg0 = {
      # Determines the IP address and subnet of the client's end of the tunnel interface.
      ips = [ "10.100.0.2/24" ];
      listenPort = 51820; # to match firewall allowedUDPPorts (without this wg uses random port numbers)

      # Path to the private key file.
      #
      # Note: The private key can also be included inline via the privateKey option,
      # but this makes the private key world-readable; thus, using privateKeyFile is
      # recommended.
      privateKeyFile = "/home/alex/wireguard-keys/private";

      peers = [
        # For a client configuration, one peer entry for the server will suffice.

        {
          # Public key of the server (not a file path).
          publicKey = "aD40D1jcgLbIZGkA1AoXkwpmP6hSWcttf3ptq4GRjC0=";

          # Forward all the traffic via VPN.
          allowedIPs = [ "0.0.0.0/0" ];
          # Or forward only particular subnets
          #allowedIPs = [ "10.100.0.1" "91.108.12.0/22" ];

          # Set this to the server IP and port.
          endpoint = "192.168.1.226:51820"; # ToDo: route to endpoint not automatically configured https://wiki.archlinux.org/index.php/WireGuard#Loop_routing https://discourse.nixos.org/t/solved-minimal-firewall-setup-for-wireguard-client/7577

          # Send keepalives every 25 seconds. Important to keep NAT tables alive.
          persistentKeepalive = 25;
        }
      ];
    };
  };

  # Enable the X11 windowing system.
  # services.xserver.enable = true;
  services.xserver.desktopManager.xfce.enable = true;
  services.displayManager.defaultSession = "xfce";

  # Syncthing
  services = {
    syncthing = lib.mkForce {
      enable = true;
      user = "alex";
      dataDir = "/home/alex/Sync";
      configDir = "/home/alex/Sync/.config/syncthing";
      overrideDevices = true; # overrides any devices added or deleted through the WebUI
      overrideFolders = true; # overrides any folders added or deleted through the WebUI
      settings = {
        devices = {
          "atauno" = { id = "TXSURD2-XCKOLDG-DJ76OOK-JZXOE3Q-XXTNOIM-XR5LB2B-YWBV2ER-6KRFIQN"; };
        };
        folders = {
          # "Documents" = {
          #   # Name of folder in Syncthing, also the folder ID
          #   path = "/home/myusername/Documents"; # Which folder to add to Syncthing
          #   devices = [ "device1" "device2" ]; # Which devices to share the folder with
          # };
          "vaults" = {
            id = "bbqnm-caya2";
            path = "/home/alex/vaults";
            devices = [ "atauno" ];
            ignorePerms = false; # By default, Syncthing doesn't sync file permissions. This line enables it for this folder.
          };
        };
      };
    };
  };

  services.blueman.enable = true;

  services.avahi = {
    enable = true;
    nssmdns4 = true;
    openFirewall = true;
  };

  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
  # (the default) this is the recommended approach. When using systemd-networkd it's
  # still possible to use this option, but it's recommended to use it in conjunction
  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
  networking.useDHCP = lib.mkDefault true;
  # networking.interfaces.enp58s0f1.useDHCP = lib.mkDefault true;
  # networking.interfaces.wlp59s0.useDHCP = lib.mkDefault true;

  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
  powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";
  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;

  # This value determines the NixOS release from which the default
  # settings for stateful data, like file locations and database versions
  # on your system were taken. It's perfectly fine and recommended to leave
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
  system.stateVersion = "23.05"; # Did you read the comment?
}