nixos-config/nixos76/system/configuration.nix

207 lines
6.0 KiB
Nix
Raw Normal View History

2023-06-16 23:08:03 +00:00
# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running `nixos-help`).
2023-06-17 00:30:33 +00:00
{ config, pkgs, ... }:
2023-06-16 23:08:03 +00:00
{
imports =
2023-06-17 17:51:24 +00:00
[
# Include the results of the hardware scan.
2023-06-16 23:08:03 +00:00
./hardware-configuration.nix
];
nix.settings.experimental-features = [ "nix-command" "flakes" ];
2023-06-17 17:51:24 +00:00
nixpkgs.config.allowUnfree = true;
2023-06-25 14:54:22 +00:00
2023-06-17 17:51:24 +00:00
hardware.system76.enableAll = true;
2023-06-16 23:08:03 +00:00
# Use the systemd-boot EFI boot loader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
networking.hostName = "nixos76"; # Define your hostname.
# Pick only one of the below networking options.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
2023-06-17 17:51:24 +00:00
networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
2023-06-16 23:08:03 +00:00
# Set your time zone.
time.timeZone = "America/New_York";
# Configure network proxy if necessary
# networking.proxy.default = "http://user:password@proxy:port/";
# networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
# Select internationalisation properties.
# i18n.defaultLocale = "en_US.UTF-8";
# console = {
# font = "Lat2-Terminus16";
# keyMap = "us";
# useXkbConfig = true; # use xkbOptions in tty.
# };
# Add LUKS external drive mount
environment.etc.crypttab = {
enable = true;
text = ''
2023-06-17 17:51:24 +00:00
# /etc/crypttab: mappings for encrypted partitions.
#
# Each mapped device will be created in /dev/mapper, so your /etc/fstab
# should use the /dev/mapper/<name> paths for encrypted devices.
#
# See crypttab(5) for the supported syntax.
#
# NOTE: Do not list your root (/) partition here, it must be set up
# beforehand by the initramfs (/etc/mkinitcpio.conf). The same applies
# to encrypted swap, which should be set up with mkinitcpio-openswap
# for resume support.
#
# <name> <device> <password> <options>
# luks-d515fd8a-a021-4a1e-bd21-5793c3c3a771 UUID=d515fd8a-a021-4a1e-bd21-5793c3c3a771 /crypto_keyfile.bin luks
externaldrive UUID=b9e3979c-9362-4242-a835-6dd702dfb0ee /etc/externalHD_keyfile.bin luks
'';
2023-06-16 23:08:03 +00:00
};
fileSystems."/media/external".device = "/dev/mapper/externaldrive";
2023-06-17 17:51:24 +00:00
2023-06-16 23:08:03 +00:00
# Enable the X11 windowing system.
services.xserver.enable = true;
services.xserver.desktopManager.xfce.enable = true;
services.xserver.displayManager.defaultSession = "xfce";
hardware.opengl.enable = true;
hardware.opengl.driSupport = true;
hardware.opengl.driSupport32Bit = true;
hardware.opengl.setLdLibraryPath = true;
hardware.opengl.extraPackages = [
pkgs.intel-media-driver
2023-06-17 17:51:24 +00:00
];
2023-06-16 23:08:03 +00:00
hardware.opengl.extraPackages32 = [
pkgs.intel-media-driver
pkgs.pkgsi686Linux.libva
2023-06-17 17:51:24 +00:00
];
2023-06-16 23:08:03 +00:00
# Configure keymap in X11
# services.xserver.layout = "us";
# services.xserver.xkbOptions = "eurosign:e,caps:escape";
# Enable blueooth
hardware.bluetooth.enable = true;
# Enable sound.
sound.enable = true;
hardware.pulseaudio = {
enable = true;
package = pkgs.pulseaudioFull;
support32Bit = true;
};
# Enable touchpad support (enabled default in most desktopManager).
services.xserver.libinput.enable = true;
# Define a user account. Don't forget to set a password with passwd.
users.users.alex = {
isNormalUser = true;
extraGroups = [ "wheel" "networkmanager" ]; # Enable sudo for the user.
};
fileSystems."/home/alex/Documents" = {
2023-06-17 17:51:24 +00:00
device = "/media/external/Documents";
options = [ "bind" ];
2023-06-16 23:08:03 +00:00
};
fileSystems."/home/alex/Games" = {
2023-06-17 17:51:24 +00:00
device = "/media/external/Games";
options = [ "bind" ];
2023-06-16 23:08:03 +00:00
};
fileSystems."/home/alex/Git" = {
2023-06-17 17:51:24 +00:00
device = "/media/external/Git";
options = [ "bind" ];
2023-06-16 23:08:03 +00:00
};
fileSystems."/home/alex/Lutris" = {
2023-06-17 17:51:24 +00:00
device = "/media/external/Lutris";
options = [ "bind" ];
2023-06-16 23:08:03 +00:00
};
fileSystems."/home/alex/Music" = {
2023-06-17 17:51:24 +00:00
device = "/media/external/Music";
options = [ "bind" ];
2023-06-16 23:08:03 +00:00
};
fileSystems."/home/alex/Pictures" = {
2023-06-17 17:51:24 +00:00
device = "/media/external/Pictures";
options = [ "bind" ];
2023-06-16 23:08:03 +00:00
};
fileSystems."/home/alex/Videos" = {
2023-06-17 17:51:24 +00:00
device = "/media/external/Videos";
options = [ "bind" ];
2023-06-16 23:08:03 +00:00
};
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
2024-01-20 00:24:06 +00:00
# atau-wallpapers
2023-06-16 23:08:03 +00:00
blueman
dxvk
2023-12-10 18:04:58 +00:00
envsubst
2023-06-16 23:08:03 +00:00
font-manager
2023-12-24 22:07:21 +00:00
gparted
2023-06-16 23:08:03 +00:00
lshw
2024-01-20 00:24:06 +00:00
mesa
2023-12-10 18:35:31 +00:00
nodejs_20
2023-06-16 23:08:03 +00:00
pavucontrol
unzip
2023-06-25 14:54:22 +00:00
vim
2023-06-16 23:08:03 +00:00
vulkan-extension-layer
wget
];
services.blueman.enable = true;
2023-12-22 22:33:41 +00:00
services.printing.enable = true;
services.avahi = {
enable = true;
2024-01-20 00:24:06 +00:00
nssmdns4 = true;
2023-12-22 22:33:41 +00:00
openFirewall = true;
};
2023-06-16 23:08:03 +00:00
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = {
# enable = true;
# enableSSHSupport = true;
# };
# List services that you want to enable:
# Enable the OpenSSH daemon.
# services.openssh.enable = true;
# Open ports in the firewall.
# networking.firewall.allowedTCPPorts = [ ... ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Or disable the firewall altogether.
# networking.firewall.enable = false;
# Copy the NixOS configuration file and link it from the resulting system
# (/run/current-system/configuration.nix). This is useful in case you
# accidentally delete configuration.nix.
# system.copySystemConfiguration = true;
# This value determines the NixOS release from which the default
# settings for stateful data, like file locations and database versions
# on your system were taken. It's perfectly fine and recommended to leave
# this value at the release version of the first install of this system.
# Before changing this value read the documentation for this option
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
system.stateVersion = "23.05"; # Did you read the comment?
}